Features
●High accuracy and high stability
●Wide choice of measuring ranges
●Solid ceramic sensitive diaphragm
●Smart volume, easy for encapsulation
●Excellent shock and vibration resistance
●Excellent corrosion and abrasion resistance
●Low cost, extreme extensive application range
●Thermally compensated, wide-range operating temperature

Descriptions

PS100E03 series 4-20mA ceramic pressure sensor is made with a monolithic ceramic cell and works following the piezoresistive principle. The wheatstone bridge is screen printed directly on one side of the ceramic cell by means of Thick Film technology and signal conditioning electronics generate 4 ... 20 mA anlog output (customized is available). Pressure and temperature calibration are done electronically with the on-board ASIC. Electronics provides offset and span correction when the temperature changes. Due to the excellent chemical immunity of the the Al2O3 ceramic, the PS100E03 sensor is suitable for nearly all aggressive media.

Mounting recommendations

The sensor is sensitive to the humidity, here is some recommendations for mounting. Before mounting, put the sensor into a drying oven with 85°C for at least 30 minutes. During mounting, make sure the environment humidity is keep under 50%. After mounting, appropriate sealing measures should be taken to protect the sensor.