flush diaphragm pressure sensor 4-20mA for vapour or gas
Time:2019-05-13
I would like to get pressure transmitter range is -1bar to 3bar. Output is 4-20mA or 0-10V. Temperature is about 90degC. For sugar mill eveporator. medium is vapour or gas.
 |
 |
|
Flush Diaphragm Pressure Transmitter |
Flush Pressure Transmitter |
Performance
|
Accuracy |
±0.5% |
|
Response time |
< 4 ms |
|
Overload pressure |
2.0 × FS (≤ 250 bar) |
|
1.5 × FS (> 250 bar) |
|
|
Pressure Range |
-1 to 3 bar |
|
Pressure type |
Vented gauge |
|
Stability |
≤0.2%F.S./Year |
|
Temp Coefficient |
±0.03%F.S./°C |
Electrical specifications
|
Output signal |
4 − 20 mA |
|
Supply voltage [UB] |
9-30V |
|
Load [RL] (load connected to 0 V) |
RL ≤ (UB-9V)/0.02 A |
|
Polarity protected |
yes |
|
Short-circuit protected |
yes |
Environmental conditions
|
Medium temperature range |
-40°C → +100°C |
|
Ambient temperature range (depending on electrical connection) |
-20°C → +80°C |
|
Compensated temperature range |
0°C → +70°C |
|
EMC - Emission |
EN 61000-6-3 |
|
EMC Immunity |
EN 61000-6-1 |
|
Insulation resistance |
>100 MΩ at 500 V |
Mechanical characteristics
|
Materials |
Diaphragm |
Stainless steel 316L |
|
Enclosure |
Stainless steel 304 |
|
|
Electrical connections |
PA |
|
|
Weight (depending on pressure connection and electrical connection) |
200g |
|
|
Pressure Connection |
G1/2" |
|
|
Electrical Connection |
DIN43650A(Hirschmann) | |
