isolated pressure sensor transducer 400kpa with mV output signal
Time:2019-04-30
We are looking for a pressure sensor can be used in our device to used in our instrumentation for underwater research and fisheries catch sampling. The pressure we need is up to 4 bar, and it should be sealed gauge or absolute type, so it can be used in the seawater.
isolated pressure sensor transducer 400kpa with mV output signal
Parameters
|
Power Supply |
1.5mADC typical |
|
Zero Output |
±2mV |
|
Span Output |
100±20mV (typical) |
|
Pressure Range |
400KPa (absolute) |
|
Accuracy(0 to 600KPa ... 6MPa) |
0.5% F.S |
|
Overload |
2.0 × F.S. |
|
Operating Temperature |
-20 to 100°C |
|
Storage Temperature |
-40 to 125°C |
|
Bridge Resistance |
2.3KΩ to 4KΩ |
|
Insulation |
100MΩ/250VDC |
|
Vibration |
20g/(20 to 5000Hz) |
|
Endurance |
˃100 x 106 FS Cycles |
|
Stability |
≤0.2% F.S./Year |
Machanical Configurations
|
O-Ring |
Viton (Ø12 × 1 mm) |
|
Diaphragm |
Stainless steel 316L |
|
Housing |
Stainless steel 304 |
|
Filling Liquid |
Silicone oil |
|
Electrical Connection |
Ø14 × 6 mm |
