Home > for PCB mount, low cost price>PCB pressure transducer

PCB pressure transducer

Model NO.: SS111 series


1,mV output signal

2,Absolute  pressure only

3,Low cost, standard diameter 19mm

4,Measure non-conductive, non-corrosive gas

5,Non-temperature-compensated, height 4mm only

6,High performance silicon chip, protected by silicon gel

7,Constant power supply 1.0mADC, 1.5mADC, 5VDC, 10VDC


SS111 series silicon gel coating pressure transducers have the diameter 19mm and height 4mm only, is a kind of low cost type piezo-resistive sensor. The most important sensing part is a high stable piezoresistive silicon die, which is protect by a transparent silicon gel to against the effects of the external environment. The pressure act on the gel and then transmit the pressure to the chip, available from 6bar to 25 bar. not temperature compensated but still have a good performance. Electrical connection is made via a five pin header, a PCB can be soldered directly to the header pins, suitable to measure all silicon gel compatible gas, for examples industrial process control, meteorology.