Home > News And Articles >Stainless steel level sensors for water wells

Stainless steel level sensors for water wells

2015-07-05

Hello Sendo Sensor, I'm interested in a couple of sensors from you. I like the size of the SS122 sensors and I need a date sheet to purchase them. Also do you have a warranty on your sensors? The submersible level sensor i am looking for right now to be used in water wells. I'm not sure about the temperature but I would guess somewhere around 20C.I am looking for a custom part number because I want a pressure range of 0-35 meters and a cable length of 50meters. The power supply is not so important, I can do either 5v or 10v Dc for a power source. Please let me know if you have any other comments for this.


SS122 Series Submersible Pressure Transducers for level and depth applications

Features

Output signals: mV
Hermetically sealed
Protective cap included
Stainless steel 316L diaphragm
All stainless steel structure, oil filled
Various power supply: 1.5mADC, 5VDC,10VDC
AK Fluids US silicon oil, nontoxicity, good bio-compatibility
Pressure ranges in gauge or absolute from 0.05 up to 20 bar


Descriptions

SS122/634/634P series submersible pressure sensors use piezoresistive technology, oil filled, all stainless steel integrated structure with IP68 grade, suitable for liquid level and depth measurement. Their all stainless steel, hermetically sealed housing makes them suitable for immersion in most industrial liquids and oils, are designed to give accurate readings at pressure ranges from 50 mBar up to 20 Bar (corresponding to water column depths of 0.5 m to 200 m).

The electrical connection is a special designed PE cable with air tube and the pressure connection part is an exposed 316L stainless steel diaphragm, no pressure port and no blocking problems, easy for daily maintenance. The all-welded design eliminates the need for an O-Ring seal, thereby eliminating potential leak paths. Typical applications including water and sewage treatment plants, water level monitoring at reservoirs/dams, down-hole water wells.

SS122 series are designed with mV output signal with 1.5mA, 1.0mA, 3VDC or 5VDC supply.

SS634 series are designed with amplified signals, 4-20mA output or 0-10V, 0-5V voltage output.

SS634P series are fitted with a welded pressure connection 1/4”BSP, as standard to give the very best in media compatibility and integrity other pressure connection is on request. Available with standard voltage and 4-20mA current outputs.


Technical data

Performance (EN 60770)

Total error band (inside the compensated temperature range)

±0.25%

Response time

< 1 ms

Overload pressure

2 × FS

Pressure Range

0-3.5bar

Pressure type

vented gauge

Stability

≤0.2%FS/Year

Temp coefficient

±0.03%FS/°C


Environmental conditions

Medium temperature range

-20°C +85°C

Ambient temperature range

-20°C +85°C

Compensated temperature range

0°C +60°C


Mechanical characteristics

Materials

Diaphragm

Stainless steel 316L

Enclosure

Stainless steel 304

Cable

PE

Weight (depending on cable length)

4.0 kg

Cable Sealing rating

IP68